![]() ![]() That’s it you have just found your Motherboard ID and Processor, in this case the board in the tablets ID was: CB-M RU 94V-0 Last look on the board for a number its usually at the top section and it’s clearly written, this will be your Board ID, record it: Look on the main part of the board and you should see a processor look out for A13 or A10 marked on them clearly:ĥ. Once both halves separate, carefully move them apart and watch out for wires such as the one that runs from the speakers.Ĥ. Once you have found the seems, use a tool set such as the ones used in opening phones or a blunt object and force it into the seems,its best to start around the charge port in most cases, the parts will separate with little trouble as long as you are firm-do not break the clips that hold both halves together but separate the halves until the entire thing comes apart.You can refer to the video for details instructions.ģ. Tablets do not have screws that seal them in most cases so you will have to find the seems that hold both halves together.Ģ. To find out both you will need to open your Tablet, do not panic it’s not as bad as it sounds trust me, here are the steps:ġ. The two main type of processors that you will find on your tablet are usually the A13 and A10 processors respectively. Alldaymall, Irulu, GPad or so on but beneath they are sporting similar hardware and all you have to do is find a firmware that matches the board ID and the processor or ones thats close and you can flash your tablet and have it functioning as new. The process of identifying your tablets firmware begins with knowing your Tablets Processor and board ID, believe it or not most of these entry-level Chinese tablets are usually sporting similar boards and processors for the most part, the names of the devices might change e.g. All other trademarks are the property of their respective owners.How to identify your Tablets Processor and Board ID? TiVo and the TiVo logo are registered trademarks of TiVo Inc. Availability of programs varies and is determined by the program provider(s). Not all programs may be streamed using the Xtream TV App due to the copy protection assigned them by the program provider. Not all devices have the necessary software required to view programming content. You must have a current Mediacom ID, as well as a subscription to the corresponding cable TV network(s) you wish to access. Access to TV programming is based upon your TV service subscription level. Internet service is required to use the Xtream TV App. A subscription to Mediacom’s TV service with TiVo. A mobile device with a WiFi internet connection At home, transform your device into a second TV screen or a remote control. ![]() ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |